Qlogic QConvergeConsole CLI 2400 Series User Manual

10–Converged Network Adapter Interactive Commands
Display FCoE Port Statistics
10-134 SN0054667-00 C
Display Test Parameters (-gs)
4. Display FCoE Port Statistics<port selection>1. Display Test Parameters
From the HBA Statistics menu, select the Display Test Parameters option to
view status logging parameters. For example:
---------------------------------------
HBA Port Statistics Settings
---------------------------------------
AutoPoll (AP): 10
SetRate (SR): 5
LogToFile (LF): N/A
Reset Test Parameters
4. Display FCoE Port Statistics<port selection>2. Reset Test Parameters
From the HBA Statistics menu, select the Reset Test Parameters option to reset
the status logging parameters to their default values.
Configure Test Parameters (-gs)
4. Display FCoE Port Statistics<port selection>3. Configure Test Parameters
From the HBA Statistics menu, select the Configure Test Parameters option to
open the Configure Test Parameters Menu with options to specify the polling
method, the polling rate, and the name of the log file. For details about these
parameters, see Tab le 5 - 5. For example:
Configure Test Parameters Menu
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
ENode MacAddr : 00:0E:1E:04:95:EB
CNA Model : QLE8242
CNA Desc. : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)
FW Version :
WWPN : 21-00-00-0E-1E-04-95-EB
WWNN : 20-00-00-0E-1E-04-95-EB
Link : Online
=======================================================
1: Auto Poll
2: Set Rate
3: Set Log File

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English