Qlogic QConvergeConsole CLI 2400 Series User Manual

9–Fibre Channel Interactive Commands
Refresh
SN0054667-00 C 9-45
Refresh
6. Refresh
From the main menu, select the Refresh option to refresh (reload) the adapters
and adapter port indexes. For example:
Scanning for QLogic adapters, please wait...
Using config file: C:\Program Files\...\iscli.cfg
Using config file: C:\Program Files\...\netscli.cfg
Loading: 1. CNA ... adapters, please wait...
Loading: 1. CNA Port index : 1 ...
Loading: 1. CNA Port index : 2 ...
Refreshing interfaces ... Please wait ......
Scanning for QLogic adapters, please wait...
Hit <Enter> to continue:
When you run QConvergeConsole CLI, the CLI collects all relevant information,
including the number of available ports and the state of each one. Between the
time you start QConvergeConsole CLI and the time you perform a specific action
or request additional information, changes may have occurred to the port state,
network state, or firmware parameters. To ensure that you are viewing the most
current information, you should perform a Refresh. (In some cases,
QConvergeConsole CLI automatically refreshes the information before or after
specific commands.)
Help (-h)
7. Help
From the main menu, select the Help option to view the syntax and description for
each noninteractive command line option. For more detailed information about
each command, see the noninteractive chapter for the specific adapter type.
Exit
8. Exit
From the main menu, select the Exit option to close the QConvergeConsole CLI
session.

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English