Qlogic QConvergeConsole CLI 2400 Series User Manual

8–NIC Interactive Commands
Beacon/LED Test (-testled)
SN0054667-00 C 8-15
Beacon/LED Test (-testled)
4. Adapter Diagnostics1. Converged Network Adapter6. Beacon/LED Test
From the Converged Network Adapter (CNA) Diagnostics menu, select the
Beacon/LED Test option. From the port menu, select a port to run the test. For
example:
Converged Network Adapter (CNA) Diagnostics
CNA Model QLE3242 SN: AFE1030C04339
1. Port 2 [Protocol(s): NIC]
MAC Address: 00:0E:1E:04:D3:34
2. Port 1 [Protocol(s): NIC]
MAC Address: 00:0E:1E:04:D3:30
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
LED Test Starts ...
Test Status: Failed (Passed=0, Failed=1, ErrorCode=1)
LED Test Results:
Status=Failed
Passed=0, Failed=1, ErrorCode=1
Adapter Statistics
5. Adapter Statistics1. Converged Network Adapter
From the main menu, select the Adapter Statistics option and then select 1
(Converged Network Adapter). The Converged Network Adapter (CNA)
Statistics menu presents options to view NIC port statistics, reset logging
parameters, and undo. For example:
Adapter Type Selection
1: Converged Network Adapter
2: Fibre Channel Adapter
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
Converged Network Adapter (CNA) Statistics
1: Display NIC Port Statistics
2: Reset NIC Statistics
3: Undo Reset NIC Statistics

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English