Qlogic QConvergeConsole CLI 2400 Series User Manual

6–iSCSI Noninteractive Commands
-import (Import HBA Configuration)
6-12 SN0054667-00 C
Figure 6-1. Adapter Port Information
The following shows an example of the adapter port information:
0. HBA 0 Port: 0 HBA Port Instance: 0 HBA Model: QLA4050C
HBA Serial Number: FS20525B03135FW Version: 2.2.4.45 Type: Copper
IP Address: 192.168.3.7
Alias: iSCSI name: iqn.2000-04.com.qlogic.fs10506a02810.1
1. HBA 1 Port: 0 HBA Port Instance: 1 HBA Model: QLA4062C
HBA Serial Number: AS40637A04673FW Version: 3.0.1.18 Type: Copper
IP Address: 192.168.3.22
Alias:
iSCSI name: iqn.2000-04.com.qlogic.as10506a02810.1
2. HBA 1 Port: 1 HBA Port Instance: 2 HBA Model: QLA4062C
HBA Serial Number: AS40637A04673FW Version: 3.0.1.18 Type: Copper
IP Address: 192.168.3.38
Alias: iSCSI name: iqn.2000-04.com.qlogic.as10506a02810.1
3. HBA 2 Port: 0 HBA Port Instance: 3 HBA Model: QLA4010
HBA Serial Number: FS20407B03135FW Version: 3.0.1.17 Type: Copper
IP Address: 192.168.3.72
Alias: iSCSI name: iqn.1991-05.com.microsoft.steinway.qlogic.org
-import
(Import HBA Configuration)
To import an adapter configuration from a file (see “-save (Save Host
Configuration)” on page 6-23), issue the -import command as follows:
-import <hba_no_target> <hba_no_Source> [A] [F N I T C B]
<file_name>
Item 0
HBA 0 (First HBA
detected in system)
Port 0 on this HBA
HBA Model Number
0. HBA: 0 Port: 0 HBA Port Instance: 0 HBA Model: QLA4050C
HBA Port Instance 0
(First detected in system)

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English