4–NIC Noninteractive Commands
-vtsave (Save VLAN & Teaming Configuration)
4-28 SN0054667-00 C
-vtsave
(Save VLAN & Teaming Configuration)
To save the currently configured VLAN and team settings to a file, issue the
-vtsave command as follows:
> qaucli -pr nic -vtsave [file_name]
>qaucli -pr nic -vtsave c:/system_1.cfg
Using config file: E:\Program Files\QLogic Corporation
\QConvergeConsoleCLI\netscli.cfg
Loading CNA Data ...
Loading: 1. CNA ...
Loading: 1. CNA Port index : 1 ...
Loading: 1. CNA Port index : 2 ...
Loading: 2. CNA ...
Loading: 2. CNA Port index : 1 ...
Loading: 2. CNA Port index : 2 ...
Refreshing interfaces ... Please wait ...
Attempting to save TEAMs and VLANs Configuration.
Team: 1 Team Description: QLogic VT-IM Miniport Driver VLAN ID: 555 Team Type:
Fail Over
Team Members:
CNA: 1 CNA Port: 2 MAC: 00:c0:dd:0a:b4:61 Description: QLogic 10Gb PCI
Ethernet Adapter #4
CNA: 1 CNA Port: 1 MAC: 00:c0:dd:0a:b4:60 Description: QLogic 10Gb PCI
Ethernet Adapter #3
VLAN List:
ListIndex: 1 Team: 1 Team Description: QLogic VT-IM Miniport Driver VLAN ID:
555 MAC: 00:c0:dd:0a:b4:60 Description: QLogic VT-IM Miniport Driver
VLAN List:
Team: 1 Team Description: QLogic VT-IM Miniport Driver VLAN ID: 555 MAC:
00:c0:dd:0a:b4:60 Description: QLogic VT-IM Miniport Driver #2
Successfully saved TEAMs/VLANs
NOTE:
If you do not specify a configuration file name, the VLAN and teaming
settings are saved in the default file, vtstate-user.cfg, which is
saved in the QConvergeConsole CLI installation directory. Saved
settings can be later reinstated using the -vtrestore option.
A configuration that is saved with the -vtsave command can be
restored only with the -vtrestore command. Similarly, a configuration
that is saved using the QLogic Windows Teaming property pages can be
restored only with the Windows Teaming property pages.
To Next Page
Loading...
Need help?
General
