10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
SN0054667-00 C 10-51
Display HBA Level Parameters
2. CNA iSCSI Configuration1. HBA Level Parameter Configuration1. Display HBA Level Parameters
Select the Display HBA Level Parameters option to view adapter parameters.
For example:
------------------------------------------------------------------
HBA_Alias :hba_alias
------------------------------------------------------------------
Configure HBA Level Parameters
2. CNA iSCSI Configuration1. HBA Level Parameter Configuration2. Configure HBA Level Parameters
Select the Configure HBA Level Parameters option to configure the adapter
alias. For example:
------------------------------------------------------------------
HBA_Alias [] :hba_alias
------------------------------------------------------------------
Save changes and reset HBA
2. CNA iSCSI Configuration1. HBA Level Parameter Configuration3. Save changes and reset HBA
Select the Save changes and reset HBA option to save changes and reset the
adapter. For example:
There are multiple ports on the HBA you are saving.
You can save all the changes you have made to each port on this
HBA or save changes for this port. If you save just this port,
the changes for the other port, if any, will be lost.
Do you want to save both ports?[Yes] Yes
Refresh
Select the Refresh option to refresh the adapter data.
To Next Page
Loading...
Need help?
General
