10–Converged Network Adapter Interactive Commands
CNA NIC Configuration
SN0054667-00 C 10-93
Configure VLAN Parameters
3. CNA NIC Configuration3. VLAN Configuration4. Configure VLAN Parameters
From the Configure VLANs Menu, select the Configure VLAN Parameters
option to configure VLAN parameters. For example:
VLAN(s) Information:
Updating VLANs info ...
Done ...
Available VLAN ID(s):
300, 0
Select VLAN ID : 0
Updating parameters ... Plese wait ...
IFP_Jumbo_Packet_Size (590 .. 9614)[1514]:
IFP_LSO_IPv4_V1 (0-Disabled 1-Enabled )[Enabled]:
IFP_LSO_IPv4_V2 (0-Disabled 1-Enabled )[Enabled]:
IFP_LSO_IPv6_V2 (0-Disabled 1-Enabled )[Enabled]:
IFP_Checksum_Offload_IPv4 (0-Disabled 1-TX Enabled 2-RX Enabled 3-RX and TX
Enabled )[RX and TX Enabled]:
IFP_UDP_Checksum_Offload_IPv4 (0-Disabled 1-TX Enabled 2-RX Enabled 3-RX and
TX Enabled )[RX and TX Enabled]:
IFP_TCP_Checksum_Offload_IPv4 (0-Disabled 1-TX Enabled 2-RX Enabled 3-RX and
TX Enabled )[RX and TX Enabled]:
IFP_TCP_Checksum_Offload_IPv6 (0-Disabled 1-TX Enabled 2-RX Enabled 3-RX and
TX Enabled )[RX and TX Enabled]:
IFP_UDP_Checksum_Offload_IPv6 (0-Disabled 1-TX Enabled 2-RX Enabled 3-RX and
TX Enabled )[RX and TX Enabled]:
IFP_Large_RECV_Offload (0-Disabled 1-Enabled )[Enabled]:
IFP_RSS (0-Disabled 1-Enabled )[Enabled]:
User_Assigned_Name []:
Save configured values? (yes, no) [yes]:
Remove VLAN from Port or Team
3. CNA NIC Configuration3. VLAN Configuration5. Remove VLAN from Port or Team
From the Configure VLANs Menu, select the Remove VLAN from Port or Team
option to remove a VLAN. For example:
VLAN List:
ListIndex: 1 CNA: 1 CNA Port: 2 VLAN ID: 300,0(untag) MAC:
00:0e:1e:04:95:ec Description: QLogic Dual Port
10 Gigabit Ethernet CNA, PCIe 2.0 Adapter #2
Select ListIndex from the list (1 or ALL):
To Next Page
Loading...
Need help?
General
