10–Converged Network Adapter Interactive Commands
CNA NIC Configuration
10-102 SN0054667-00 C
Unset Primary Team Member
3. CNA NIC Configuration4. Team Configuration9. Unset Primary Team Member
From the Configure Teams Menu, select the Unset Primary Team Member
option to unset the primary team member. For example:
Team Index: 1 Team Description: [Default Vlan][Team 2]:QLogic Teaming Virtual
Adapter #3
Select Team Index : 1
Team Members:
CNA: 1 CNA Port: 1 MAC: 00:0e:1e:04:95:e8 Description: "QLogic Dual Port 10
Gigabit Ethernet CNA, PCIe 2.0 Adapter"
Current selection:
Team : [Default Vlan][Team 2]:QLogic Teaming Virtual Adapter #3
Primary : QLogic Dual Port 10 Gigabit Ethernet CNA, PCIe 2.0 Adapter
Clear primary? (yes, no) [yes]: y
Saving team: [Default Vlan][Team 2]:QLogic Teaming Virtual Adapter #3
About to save team config. Please wait ...
Successfully saved extended parameters.
Save VLAN & Teaming Configuration
3. CNA NIC Configuration4. Team Configuration10. Save VLAN & Teaming Configuration
From the Configure Teams Menu, select the Save VLAN & Teaming
Configuration option to save the VLAN and teaming configuration. For example:
Please Enter Selection: 10
Enter file name (or ENTER for vtstate-user.xml) :
To Next Page
Loading...
Need help?
General
