5–Fibre Channel Noninteractive Commands
-n (Set Selected HBA Parameter)
SN0054667-00 C 5-27
Login retry count LoginRetryCount LR 0–255
Link down timeout LinkDownTimeOut LT 0–240
Maximum LUNs per target MaximumLUNsPerTarget ML 0, 8, 16, 32, 64, 128, 256
Operation mode OperationMode OM
See table note
e
Port down retry count PortDownRetryCount PD 0–255
Reset Delay ResetDelay RD 0-255
Table Notes
a
Connection Options:
0 = Loop only
1 = Point-to-point only
2 = Loop preferred, otherwise point-to-point
3 = Point-to-point preferred, otherwise loop (QLA22xx adapters only)
b
Data Rate (QLA23xx/QLA24xx/QLE23xx/QLE24xx and QLE2562):
0 = 1 Gb
1 = 2Gbs
2 = Auto
3 = 4 Gbs
4 = 8 Gbs
c
EnableBIOS option not available on 4Gb adapter.
d
EnableExtendedLogging option not available on PPC64 or SPARC.
e
Operation mode (QLA/QLE23xx, QLA/QLE24xx, and QLE2562):
0 = interrupt for every I/O completion
5 = interrupt when interrupt delay timer expires
6 = interrupt when interrupt delay timer expires or no active I/O
NOTE:
QLA200/210 adapters have a limited set of parameters that can be
changed.
Table 5-9. Adapter Parameters (Continued)
Description Name Alias Value
To Next Page
Loading...
Need help?
General
