QL-800 Maintenance Utility
QL-800 User Guide 51
5 Choose the ... button. Browse to the QL800_vX_X.upgrade file and choose Open.
6 Choose Send to Printer.
A progress indicator will be displayed and the firmware will be upgraded. When this
process is complete, proceed to the next step.
Note: The upgrade process requires up to 25 minutes. Allow the upgrade process
to finish without interruption.
7 Power off the printer. On the rear of the printer, turn the power inlet switch off.
8 On the rear of the printer, turn the power inlet switch on. Power on the printer.
Setting the Clock
1 Launch the QL-800 Maintenance Utility.
From the Windows Start Menu, choose Start > All Programs > QuickLabel
QL-800 > QL-800 Maintenance Utility. A language and printer prompt will open.
Select a display language and the QL-800 printer you want to connect to. Choose
OK.
2 Choose the Printer Information tab.
3 To set the date/time controls to the current date/time as defined by your Windows
clock, choose Get Current Time.
4 To read the time from the printer's internal clock and set the date/time controls
accordingly, choose Read From Printer.
5 To set the printer’s internal clock, select a date/time with the controls and choose
Save to Printer.
To Next Page
Loading...
Need help?
General