QL-800 Maintenance Utility
QL-800 User Guide 55
Cleaning Tab
Use the Cleaning tab to set up auto-maintenance, clean the printheads, and prepare
the printer for transport.
Setting up Auto-Maintenance
You can schedule automatic maintenance routines for the printer. During an
auto-maintenance routine, the printer will perform a predefined cleaning of the
printhead. This maintenance helps ensure print quality.
Note: The auto-maintenance routine uses ink and other consumables. Run the
auto-maintenance routine only as often as needed to maintain print quality.
1 Launch the QL-800 Maintenance Utility.
From the Windows Start Menu, choose Start > All Programs > QuickLabel
QL-800 > QL-800 Maintenance Utility. A language and printer prompt will open.
Select a display language and the QL-800 printer you want to connect to. Choose
OK.
2 Choose the Cleaning tab.
3 To read the auto-maintenance schedule values from the printer and set the
auto-maintenance controls accordingly, choose Read From Printer.
To Next Page
Loading...
Need help?
General