5. Select the designation sheet tray that contains the paper for the designation sheets.
6. Enter the page location of the first page of the chapter with the number keys, and then press
the [ ] key.
7. To specify another page location, repeat steps 4 to 7.
Up to 20 locations can be specified.
8. Select the main sheet tray that contains the paper to copy the originals.
9. After making all settings, press [OK] twice.
• To change the value you entered, press the key you want to change, and then enter a new value.
• When placing the designation sheets in the bypass tray, it should be the same size and orientation
as the main sheets.
• When Combine (1 Sided 2 Sided) has been selected, specified pages will always be copied on
the front of copies in the same way as in Chapters mode.
Chapters
The page locations you specify with this function will appear on the front of copy sheets.
• Before selecting this function, press [Dup./Combine/Series] and then select [1 Sided 2 Sided] or
[Combine].
• This function can be used only when you use the Duplex (1 Sided 2 Sided) or Combine function.
Advanced Copier Functions
185
To Next Page
Loading...
Need help?
General
