• p.33 "Batch Mode"
• p.34 "SADF Mode"
• p.34 "Mixed Sizes Mode"
• p.37 "Custom sizes"
Batch Mode
• When copying in Batch mode, Type 1 and 2 models copy originals of 50 or more pages as single
documents, even if those originals are divided when fed into the ADF.
• When copying in Batch mode, Type 3 and 4 models copy originals of 100 or more pages as single
documents, even if those originals are divided when fed into the ADF.
• Place special originals, such as translucent paper, one by one.
1. Press [Special Original].
2. Select [Batch] and then press [OK].
3. Place the first part of the original, and then press the [Start] key.
4. After the first part of the original has been fed, place the next part, then press the [Start]
key.
• When [SADF] is displayed instead of [Batch], specify the Batch mode under Switch to Batch in User
Tools. For details about Switch to Batch, see “Input/Output”.
• To copy subsequent originals in this mode, repeat step 4.
• When the Sort, Combine or 1 Sided 2 Sided function has been set, press the [ ] key after all
originals have been scanned.
• You cannot switch between 1-sided and 2-sided originals during copying.
Placing Originals
33
To Next Page
Loading...
Need help?
General
