General Features
This section describes the user tools in the General Features menu under Copier / Document Server
Features.
Default settings are shown in bold type.
Auto Image Density Priority
You can set whether Auto Image Density is "On" or "Off" when the machine is turned on, reset, or
modes are cleared.
The default setting for "Full Colour: Photo" is Off.
The default setting for "Full Colour: Non-photo" is Off.
The default setting for "B&W: Photo" is Off.
The default setting for "B&W: Non-photo" is On.
Original Type Priority
You can select the original type effective when the power is turned on, or modes cleared.
The default setting for "Full Colour " is Text / Photo.
The default setting for "B&W " is Text / Photo.
Original Photo Type Priority
When you select "Text / Photo" or "Photo" in "Original Type Priority", you can change the settings of
the selected original type.
The default setting for "Text / Photo" is Printed Photo.
The default setting for "Photo" is Printed Photo.
Original Type Display
You can have the original types shown on the initial display.
The default setting is Display.
If you select [Hide], the display is as below.
General Features
215
To Next Page
Loading...
Need help?
General
