Reducing or Enlarging Originals
This section describes methods of reducing or enlarging images by specifying a reproduction ratio, or a
paper size.
In addition to the functions described in this section, advanced reduce/enlarge copy functions are also
available. For details about these functions, see “Advanced Reduce/Enlarge Copying”.
• p.133 "Advanced Reduce/Enlarge Copying"
Preset Reduce/Enlarge
This function allows you to reduce or enlarge images by selecting a preset ratio.
You can register up to three frequently used reproduction ratios other than the preset Reduce/Enlarge
ratios.
Base Point
The base point of Reduce/Enlarge differs depending on how the original is scanned. When the
original is placed on the exposure glass, the upper left corner will be the base point. When it is placed
in the ADF, the bottom left corner will be the base point.
1. Base point when placed on the exposure glass
Reducing or Enlarging Originals
53
To Next Page
Loading...
Need help?
General
