When the Booklet Finisher SR3020 is installed: (Type 3 and 4)
3. Press [OK].
4. Enter the number of copies with the number keys.
5. Place the originals, and then press the [Start] key.
• When placing an original on the exposure glass, start with the first page to be copied. When placing
originals in the ADF, set so the first page is on the top.
• When placing originals on the exposure glass, or in the ADF using the Batch mode, press the [ ] key
after all the originals have been scanned.
• Paper can be stacked only if it meets the machine's size and orientation requirements. For details about
these requirements, see “Paper Requirements when Using the Finisher”.
• p.242 "Paper Requirements when Using the Finisher"
Staple
Each copy set can be stapled together.
• You cannot use the bypass tray with this function.
2. Basic Copying
82
To Next Page
Loading...
Need help?
General
