Adjust Colour Image
This section describes the user tools in the Adjust Colour Image menu under Copier/Document Server
Features.
Default settings are shown in bold type.
Background Density of ADS (Full Colour)
The background density is adjusted to skip the texture and copy. You can adjust the background
density up to 5 levels when in Full Colour.
The default setting is the middle of 5 adjustment levels.
Colour Sensitivity
You can adjust the colour specified to convert in "Colour Convert" and the colour specified for "Erase
Colour", in 5 levels.
The default setting is the middle of 5 adjustment levels.
When the colour width has been set to "Wider", and the colour to be deleted, for example is red, all
the colours that are close to magenta and orange are deleted. If it's set to "Narrower" the colour red
will be deleted.
A.C.S. Sensitivity
This 5-step setting determines the level of the standard used for discriminating between black & white
originals and full colour originals when "Auto Colour Select" is selected.
The default setting is the middle of 5 adjustment levels.
A.C.S. Priority
This setting determines the copy priority between "Black & White" and "Full Colour" when "Auto Colour
Select" is selected.
The default setting is Full Colour.
• p.213 "Accessing User Tools"
Adjust Colour Image
237
To Next Page
Loading...
Need help?
General
