5. Press [ Next] four times.
6. Press [Device Setting Information: Export (Memry Strge Devc)].
7. Set the export conditions.
• Specify whether to [Include] or [Exclude] the "Device Unique Information". "Device Unique
Information" includes the IP address, host name, fax number, etc.
• Specify an encryption key.
8. Press [Run Export].
9. Press [OK].
10. Press [Exit].
11. Log out.
• If import or export fails, you can check the log for the error. The log is stored in the same location
as the exported device setting information file.
Importing Device Information
Import device information saved on an SD card.
7. Managing the Machine
250
To Next Page
Loading...
Need help?
General
