4. Turn on the main power switch.
5. Push [User Tools]> [Login/Logout].
6. Login with the administrator user name and password.
7.
Touch "Extended Feature Settings" twice.
8. Touch "SD Card" then touch the "Browser" line.
9. Under "Install to:" touch "Machine HDD"> "Next".
10. When you see "Ready to Install", check the information on the screen to confirm your previous
selection.
11. Touch "OK". You will see "Installing…" then "Completed".
12. Touch "Exit" twice to return to the copy screen.
13. Turn off the main power switch.
14. Install the key for “Browser Unit” to the place where you want it.
15. Turn on the main power switch.
16. When the machine reaches the Ready condition, press the key that you installed in Step 14 above.
• A message will be displayed confirming that the browser option was successfully installed.
17. Turn off the main power switch.
18. Remove the SD card from the slot.
19.
Attach the slot cover.
20. Tell a customer to keep the SD card in a safe place after you have installed the application
program from the card to the HDD.
This is because:
• The SD card is the only proof that the user is licensed to use the application program.
• You may need to check the SD card and its data to solve a problem in the future.
2. Installation
152
To Next Page
Loading...
Need help?
General