1
Introduction
8
1 EV Compensation button (J)
Press to change the exposure compensation value. (p.41)
2 ISO button (N)
Press to change the ISO sensitivity. (p.43)
3 Shutter release button
Press to capture images. (p.36)
In playback mode, press halfway to switch to capture mode.
4 Main switch
Turns the power on/off, or activates the preview function.
(p.33, p.49)
5 Front e-dial (Q)
Changes the values for camera settings such as exposure.
(p.41)
You can change the menu category when a menu screen
is displayed. (p.19)
In playback mode, use this to select a different image.
6 Lens unlock button
Press to detach the lens on the camera. (p.29)
7 GPS button (4)
Turns the GPS function on/off. (p.63)
8 Mode dial lock button
Press to allow the mode dial to be turned. (p.36)
9 Mode dial
Changes the exposure mode. (p.36)
0 Mode dial lock release lever
Use this lever to release the mode dial lock to operate the
mode dial without pressing the mode dial lock button. (p.37)
a RAW/Fx button (P)
You can assign a function to this button. (p.79)
b AF Mode button (b)
Press to change the autofocus mode or the focusing area.
(p.46)
c Focus mode switch
Changes the focus mode. (p.46)
d Live View/REC button (K/a)
Displays the Live View image. (p.37)
Starts/stops recording a movie in C mode. (p.42)
e AE Metering/Delete button (2/L)
Press to change the metering method. (p.44)
In playback mode, press to delete images. (p.38)
Operating Controls
To Next Page
Loading...
Need help?
General
