5
Settings
81
u Caution
• The One Push File Format function cannot be used when
[Memory Card Options] in the A1 menu is set to [Separate
RAW/JPEG]. (p.39)
Camera settings can be saved to O, P, and Q of the mode
dial and used repeatedly.
The following settings can be saved.
1 Set the exposure mode and all of the settings
to save.
2 Select [Save USER Mode] in A4 menu
and press D.
The [Save USER Mode] screen appears.
3 Select [Save Settings] and
press D.
The [Save Settings] screen
appears.
4 Select [USER1], [USER2], or [USER3],
and press D.
5 Select [Save] and press E.
The screen of Step 3 reappears.
u Caution
• [Save USER Mode] cannot be selected when the mode dial
is set to T.
t Memo
• The settings saved as the USER mode can be displayed
on the monitor when you select [Check Saved Settings]
in Step 3.
• To reset the settings to the default values, select
[Reset USER Mode] in Step 3.
You can change the name of the USER mode in which you
saved settings.
1 Select [Rename USER Mode] in Step 3 of “Saving
the Settings” (p.81) and press D.
The [Rename USER Mode] screen appears.
2 Select [USER1], [USER2], or [USER3],
and press D.
The text-entry screen appears.
3 Change the text.
Up to 18 single-byte
alphanumeric characters and
symbols can be entered.
Saving Frequently Used Settings
A4
Exposure Mode
(except for T)
Sensitivity
EV Compensation
AE Metering
AF point
Flash Mode
Drive Mode
White Balance
Custom Image
A1-4 menu settings
(with exceptions)
E1-4 menu settings
Saving the Settings
To Next Page
Loading...
Need help?
General
