4
Playback
77
You can develop RAW images into JPEG images, and save
them as new files.
1 Select b in the playback mode palette.
The screen for selecting a processing option appears.
2 Select the desired option and press E.
When [Select single image] is selected, proceed to Step 6.
The image/folder selection screen appears.
3 Select image(s) or a folder.
Refer to Step 2 of “Deleting Selected Images” (p.68) for how
to select image(s).
4 Press G.
The screen for selecting the parameter setting method
appears.
5 Select the parameter setting
method and press E.
6 Set the parameters.
Available operations
For Image Capture Settings and Lens Correction, press D
and use AB to select an item.
For White Balance, Custom Image, and Digital Filter,
press D to display the setting screen.
7 Press E.
The save confirmation screen appears.
Developing RAW Images
Select single
image
Develops an image.
Select multiple
images
Develops up to 500 images with the
same settings.
Select a folder
Develops up to 500 images in the
selected folder with the same settings.
100
_
0505100
_
0505001/500001/500
Develop images as shotDevelop images as shot
Develop images withDevelop images with
modified settingsmodified settings
OKOK
Develop
images
as shot
Allows you to change Image Capture
Settings (File Format, JPEG Recorded
Pixels, and JPEG Quality).
Develop
images with
modified
settings
Allows you to change Image Capture
Settings (File Format, Aspect Ratio, JPEG
Recorded Pixels, JPEG Quality,
Color Space), Lens Correction (Distortion
Correction, Peripheral Illumin. Corr.,
Lat-Chromatic-Ab Adj, Diffraction
Correction, Color Fringe Correction),
White Balance, Custom Image, Digital
Filter, HDR Capture, Pixel Shift Resolution,
Sensitivity, High-ISO NR, and Shadow
Correction.
AB
Selects a parameter.
CD
Changes the value.
Q
Selects a different image (when in single
image display).
100-0001
e_kb570_om.book Page 77 Friday, May 8, 2015 4:55 PM
To Next Page
Loading...
Need help?
General
