2
Getting Started
33
4 Rotate the memory card
cover as shown by 3, and
slide it in the direction of 4.
u Caution
• Do not remove the memory card while the card access lamp
is lit.
• If the memory card cover is opened while the power is on,
the camera turns off. Do not open the cover while the camera
is in use.
• Use this camera to format (initialize) a memory card that
is unused or has been previously used on other devices.
(p.35)
• Use a high-speed memory card when recording movies. If the
write speed cannot keep up with the recording speed, writing
may stop during recording.
t Memo
• For details on how the data is recorded when two memory
cards are inserted, refer to “Memory Card Settings” (p.39).
• When using an Eye-Fi card or a Flucard, refer to “Using a
Wireless Memory Card” (p.86).
Turn the camera on and make the initial settings.
1 Turn the main switch to [ON].
The first time the camera
is turned on after purchase,
the [Language/W] screen
appears.
t Memo
• The power automatically turns off when you do not perform
any operations within a set period of time. (Default setting:
1min.) You can change the setting in [Auto Power Off] of the
D3 menu.
1 Use ABCD to select the desired language and
press E.
The [Initial Setting] screen
appears in the selected
language.
Proceed to Step 6 if F
(Hometown) does not need
to be changed.
2 Press B to move the frame to F and press D.
The [F Hometown] screen appears.
3 Use CD to select a city.
Use R to change the region.
Refer to “List of World Time
Cities” (p.100) for cities that can
be selected as a hometown.
3
4
Initial Settings
Turning the Camera On
Setting the Display Language
To Next Page
General
