5
Settings
82
Available operations
4 After entering the text, move the text selection
cursor to [Finish], and press E.
The [Rename USER Mode] screen reappears.
1 Set the mode dial to O, P, or Q.
The USER mode guide is
displayed for about 30 seconds.
Use AB to check the saved
settings.
2 Change the settings as necessary.
The exposure mode can be
changed in [Exposure Mode]
of the A1 menu.
t Memo
• The settings changed in Step 2 are not saved as the USER
mode settings. When the camera is turned off, the camera
returns to the originally saved settings. To change the original
settings, save the USER mode settings again.
The date and time set at the time of initial setting (“Initial
Settings” (p.33)) serve as the date and time of your present
location and are reflected in the shooting date and time
for images.
Setting the destination to a location other than your present
location enables you to display the local date and time
on the monitor when traveling abroad and also save images
time-stamped with the local date and time.
1 Select [World Time] in D1 menu.
The [World Time] screen appears.
2 Select the time you wish to
display in [Time Setting].
F (Hometown) or G
(Destination) can be selected.
3 Select [G Destination] and press D.
The [G Destination] screen appears.
4 Use CD to select a city.
Use R to change the region.
5 Select [DST] (daylight saving time), and use CD
to select S or T.
6 Press E.
The screen of Step 2 reappears.
7 Press F twice.
ABCD
Moves the text selection cursor.
R
Moves the text input cursor.
J
Switches between upper and lower case
letters.
E
Enters a character selected with the text
selection cursor at the position of the text
input cursor.
L
Deletes a character at the position of the
text input cursor.
Using the Saved USER Mode
To Next Page
Loading...
Need help?
General
