3
Shooting
62
By shaking the Shake Reduction unit, a moiré reduction effect
simulating that of a low-pass filter can be achieved.
1 Select [AA Filter Simulator] in A3 menu
and press D.
2 Select a type and press E.
u Caution
• This function cannot be used in some capture modes
or in combination with some other functions. (p.88)
• [Bracketing] cannot be selected in the following situations.
• In M mode
• When the drive mode is set to other than [Single Frame
Shooting], [Self-timer] (12 seconds, 2 seconds),
or [Remote Control] (now, after 3 seconds)
• When HDR Capture is set
• When the number of storable images is 2 or less
• When the shutter speed is faster than 1/1000 seconds, the full
effect of this function cannot be achieved.
By using the Shake Reduction mechanism, the composition
of the image can be adjusted. Use this function when you want
to adjust the composition, such as when using a tripod during
Live View shooting.
1 Select [Live View] in A3 menu and press D.
The [Live View] screen appears.
2 Select [Composition Adjust.] and set to T.
3 Press F twice.
The camera returns to standby mode.
4 Press K.
Live View is displayed and the message [Adjust the
composition of the image] appears.
5 Adjust the composition.
The amount of adjustment
(the number of steps)
is displayed at the top right
of the screen.
Available operations
Anti-Aliasing Filter Simulator
A3/v
TYPE1
Takes pictures balancing the resolution and
moiré reduction.
TYPE2 Prioritizes moiré reduction.
Bracketing
Takes consecutive 3 images in order of [Off],
[TYPE1], and [TYPE2] (3 images are taken with
one press of the shutter release button).
99999
Composition Adjustment
A3
ABCD
Moves the composition of the image
(up to 24 steps).
R
Adjusts the level of the composition
(up to 8 steps. Not available when
the amount of adjustment to move
the composition is 17 steps or more).
M
Resets the adjustment value to the
default setting.
To Next Page
Loading...
Need help?
General
