1
Introduction
19
Most functions are set from the menus. The functions that can be set on the control panel can also be set from the menus.
t Memo
• For the Custom Setting menus (E1-4), you can show the setting screen of the next item in order of the menus on the monitor
by turning R while the submenu of the currently selected item is displayed.
•Press F to display the first tab of most appropriate menus for the camera settings at that time. To display the menu tab last
selected first, set in [23. Save Menu Location] of the E4 menu.
• Settings are returned to their default values with [Reset] of the D3 menu. To reset all the settings in the Custom Setting menus
to the defaults, use [Reset Custom Functions] of the E4 menu. (Some settings do not apply.)
Using the Menus
F
Use AB to select an item.
Use R to switch between menu tabs.
Press F to exit
the menu screen.
Menu tabs
Press D to display
the pop-up menu.
Press D to display
the submenu.
Press E to confirm
the selected item.
Press F to cancel
the pop-up menu.
Press F to return to the previous screen.
Use AB to select an item.
Use Q to change the menu category.
To Next Page
Loading...
Need help?
General
