2
Getting Started
29
1 Pass the end of the strap
through the protective cover
and triangular ring.
2 Secure the end of the strap
on the inside of the clasp.
1 Make sure that the camera is turned off.
2 Remove the body mount
cover (1) and lens mount
cover (2).
After removing the cover, be sure
to put the lens down with the lens
mount side facing upward.
3 Align the lens mount indexes
(red dots: 3) on the camera
and the lens, and secure by
turning the lens clockwise
until it clicks.
To remove the lens
Attach the lens cap, and then turn
the lens counterclockwise while
pressing the lens unlock button
(4).
Attaching the Strap Attaching a Lens
3
4
e_kb570_om.book Page 29 Friday, May 8, 2015 4:55 PM
To Next Page
Loading...
Need help?
General
