3
Shooting
63
6 Press E.
The camera returns to standby mode in Live View.
u Caution
• This function cannot be used in the following situations.
• When the drive mode is set to [Interval Shooting], [Interval
Composite], or [Interval Movie Record]
• When using the ASTROTRACER function
t Memo
• The adjusted composition is saved even if Live View is ended
or the camera is turned off. To reset the saved adjustment
value when Live View is ended, set [Composition Adjust.] to
S (Off) in [Memory] of the A4 menu. (p.83)
The following functions are available with the camera’s built-in
GPS unit.
Press 4 to turn the GPS on.
A beep sounds and the GPS indicator
lamp lights up. Press 4 again
to turn the GPS off.
You can check the GPS positioning status on the status screen
and Live View screen.
Using the GPS
GPS Logging
Saves the GPS positioning data received
periodically to the memory card. (p.65)
ASTROTRACER
Tracks and captures celestial bodies.
(p.66)
By matching the movement of the built-in
Shake Reduction unit with the movement
of celestial bodies, celestial bodies can
be captured as individual points even
when shooting with a long exposure
setting.
GPS Time Sync
Automatically adjusts the camera’s date
and time settings using information
obtained from GPS satellites. (p.64)
Green 3D positioning
Yellow 2D positioning
Red No positioning
To Next Page
Loading...
Need help?
General
