3
Shooting
53
t Memo
• The bracket value can be set in increments of 1/3 EV steps
or 1/2 EV steps according to the [1. EV Steps] setting of the
E1 menu.
• The following settings for the Exposure Bracketing can be set
in the E2 menu.
1 Press A in standby mode.
The Drive Mode screen appears.
2 Select c and press B.
3 Select c or d and press E.
The camera returns to standby mode.
4 Press the shutter release button halfway,
and then fully.
The mirror pops up and the AE Lock function is activated.
5 Press the shutter release button fully again.
The mirror returns to its original position after the image
is taken.
t Memo
• The mirror automatically returns to its original position
if 1 minute elapses after the mirror pops up.
u Caution
• Mirror Lock-up Shooting cannot be selected when shooting
with Live View.
1 Press A in standby mode.
The Drive Mode screen appears.
2 Select V and press B.
3 Select V, 2, W, or X, and press B.
4 Select [Composite Mode].
5 Specify [Number of Shots].
Select from 2 to 2000 times.
6 Press E.
The camera returns to standby mode.
7 Shoot.
Instant Review is displayed.
8. Bracketing
Order
Changes the shooting order of pictures.
9. One-Push
Bracketing
Takes all pictures with one release of the
shutter.
Mirror Lock-up Shooting
Multi-exposure
5
Average
Creates a composite image with the
average exposure.
6
Additive
Creates a composite image with the
cumulatively added exposure.
7
Bright
Creates a composite image that
combines only bright parts.
To Next Page
Loading...
Need help?
General
