Rockwell Automation 2711C-F2M Quick Start Manual

Publication 2711C-QS001F-EN-P - November 2010 25
Make Terminal Connections Chapter 2
Get the IP Address of Terminal
For Ethernet Port Connection
1. Press the Communication
button.
2. Write down the IP address.
You will need this IP address
when launching PanelView
Explorer from your Internet
browser.
If you are not using an IP
address from a DHCP
enabled network, then
contact your network
administrator on what static
IP address to use.
3. Click Main to return to the
Main configuration screen.

Rockwell Automation 2711C-F2M Specifications

General

Brand	Rockwell Automation
Model	2711C-F2M
Category	Touch terminals
Language	English