Section 2H: Using Your Phone’s Voice Services 135
Using Voice-Activated Dialing
In addition to Sprint PCS Voice Command (see page 246), you
can use a voice dial tag to automatically dial a phone number
in your Contacts. (A voice dial tag is a command you record
and use to place calls without using the keypad.) Your phone
can store up to 30 voice dial tags.
Making a Call Using Voice-Activated Dialing
To use a voice dial tag to call a phone number:
1. Press and hold or .
2. Follow the voice prompts and recite the entry’s voice dial
tag into your phone’s microphone.
Programming Voice Dial Tags
To program a voice dial tag:
1. Display a Contacts entry.
2. Selec
t a contact and press .
3. Select a phone number, and then select Options (right
softkey)
> Set Voice Tag > Add.
4. After you are prompted to say the name you wish to
program, wait for the beep and then say the name into
your phone’s microphone.
Tip:
Record voice dial tags in a quiet environment.
Note:
Please set the Voice Prompt feature (see page 50) to On before
using the Voice-Activated Dialing so that you can hear the
voice instruction from the phone. The default setting is off.
Voice Services
To Next Page
Loading...
Need help?
General
