38 Section 2A: Phone Basics
To dial or save phone numbers with pauses:
1. Enter the phone number.
2. Select Options (right softkey) and select either
Hard Pause or 2-Sec. Pause. (Hard pauses are displayed as
a “P” and two-second pauses as a “T.”)
3. Enter additional numbers.
4. Press to dial the number.
– or –
Select
Options (right softkey) > Save Phone# to save the
number in your Contacts.
Using Abbreviated Dialing
Abbreviated Dialing is similar to speed dialing. It allows you to
dial a number by entering the last four or five digits of any
number in your Contacts directory. This feature becomes
available when you enable Abbreviated Dialing and program
a five-or six- digit prefix you wish to use for abbreviated
dialing. (See “Setting Abbreviated Dialing”on page 77.)
To place a call using Abbreviated Dialing:
1. Enter the last four or five digits of the prefix phone
number.
2. Press .
Tip:
You can also place a call by selecting Options (right softkey) >
Abbrev. Dial after step 1 above.
Note:
If the digits match more than one entry, the Abbrev. Dial list
will be displayed; select the correct entry and press TALK again.
Note:
When dialing a number with a hard pause, press TALK to send
the next set of numbers.
To Next Page
Loading...
Need help?
General
