Sanyo M1 (Sprint User Manual

150 Section 2H: Using Your Phone’s Voice Services
Recording Your Name for a Prerecorded
Announcement
You can use a prerecorded announcement with or without
your name. If you record your name, your phone adds your
name to the prerecorded message to announce that you are
not available to answer calls.
To record your name:
1. Select > Tools > Voice Services > Screen Call >
Announcement
.
2. Select Pre-Recorded and select Edit (right softkey) >
Record Name
.
3. Press to start the first recording. (Press to stop
recording. The maximum recording time is 12 seconds.)
4. After the first recording, press again to start the
second recording.
5. Press to stop recording.
Recording a Customized Announcement
To record an announcement:
1. Select > Tools > Voice Services > Screen Call >
Announcement
.
2. Select Custom and select Edit (right softkey) > Record.
3. Press to start the first recording. (Press to stop
recording. The maximum recording time is 12 seconds.)
4. After the first recording, press again to start the
second recording.
5. Press to stop recording.

Sanyo M1 (Sprint Specifications

General

Brand	Sanyo
Model	M1 (Sprint
Category	Cell Phone
Language	English