Section 2L: Using Bluetooth 223
Pairing Bluetooth Devices
Paired Devices
The Bluetooth pairing process allows you to establish trusted
connections between your phone and another Bluetooth
device. When devices are paired, a passcode (sometimes
called a PIN) is shared between devices, allowing for fast,
secure connections while bypassing the discovery and
authentication process.
To pair your phone with another Bluetooth device:
1. Select > Tools > Bluetooth> Add New > Search.
(Your phone will display a list of discovered in-range
Bluetooth devices.)
2. Select the device you wish to pair with and press .
3. Select Add to Trusted.
4. Enter the PIN and press . (When the owner of the other
device enters the same PIN, the pairing is complete.)
Waiting for Request
If you are going to be using a Dial-Up Network (DUN) profile to
pair with a PC or PDA, you will need to allow the other device
to initiate pairing with your phone.
To allow your phone to be paired with another Bluetooth device:
1. Select > Tools > Bluetooth > Add New >
Wait for Request
.
2. Follow the onscreen prompts to enter your PIN and
press .
Using Bluetooth
To Next Page
Loading...
Need help?
General
