SATO CL6NX Service Manual

2 Operation and Configuration
10
CL4NX/CL6NX Service Manual
When you select Service in the Tools menu, the
printer shows the Password screen.
You need to enter the correct password in order to
access the menu.
The default password to access the Service menu is
6677.
After a successful login, LOG OUT shows on the
bottom left of the Settings menu screen.
Press the left soft button if you want to log out
immediately.
Password is required to enter the settings mode
again.
Note
With password enabled, if no button is pressed for
about ten minutes after login, the login session will end
automatically. Password is required to enter the
settings mode again.
2.1.1 Reset Passwords
If you have forgotten the customized password, you can reset it back to the default password.
1 Power off the printer.
2 Press and release the power button while pressing and holding the back button,
and buttons simultaneously until the buzzer beeps once.
Note
This key sequence allows users to access the settings menu with the default passwords as a temporary
solution.
After accessing the settings menu with the default password, you must customize the password again in the
System > Passwords > Change Password menu.
For more information about changing the password, refer to the chapter 4 of the CL4NX/CL6NX operator
manual.

SATO CL6NX Specifications

General

Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Cables included	AC
Maximum roll diameter	220 mm
Maximum printing width	167.5 mm
Printing media thickness	0.08 - 0.268 µm
USB port	Yes
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Wi-Fi	No
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	338 mm
Height	321 mm
Weight	20000 g