SATO CL6NX Service Manual

67
CL4NX/CL6NX Service Manual
+
This chapter provides in-depth procedures on all primary component and assembly replacement, in
addition to most secondary components. Be sure to observe all precautions and warning notes.
The replacement procedures described in this section are as follows.
• 5.1 Removing the Housing Cover
• 5.2 Replacing the Print Head
• 5.3 Replacing the Platen Roller
• 5.4 Replacing the Media Sensor
• 5.5 Replacing the Main (CONT) PCB
• 5.6 Replacing the KB PCB
• 5.7 Replacing the Power Supply Unit
• 5.8 Replacing the Interface Board
• 5.9 Replacing the FPGA PCB (CL6NX Only)
• 5.10 Replacing the Timing Belt
• 5.11 Replacing the Head Open Sensor
• 5.12 Replacing the Ribbon Sensor
• 5.13 Replacing the Torque Limiter for Ribbon Rewind Spindle
• 5.14 Replacing the Torque Limiter for Ribbon Supply Spindle
• 5.15 Replacing the Torque Limiter for Liner Rewinder (Optional)
• 5.16 Replacing the Timing Belt for Liner Rewinder (Optional)
CAUTION
POWER OFF THE PRINTER AND REMOVE THE POWER CORD BEFORE YOU START ASSEMBLY OR
DISASSEMBLY.
5
Replacement

SATO CL6NX Specifications

General

Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Cables included	AC
Maximum roll diameter	220 mm
Maximum printing width	167.5 mm
Printing media thickness	0.08 - 0.268 µm
USB port	Yes
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Wi-Fi	No
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	338 mm
Height	321 mm
Weight	20000 g