Siemens OpenStage 80 SIP User Manual

Enhanced phone functions
103
Step by Step
or
Select the option shown.
Select and confirm Display last/Display first
Select and confirm the option shown.
Placing a call on hold
You can use this function to place an ongoing call on
hold, for instance, to prevent the other party overhear-
ing a conversation with a colleague in the same room.
The held party hears music on hold if Music on hold is
active on this party’s phone ( page 108).
Prerequisite: You are conducting a call.
Select and confirm the option shown in the connec-
tions’s context menu.
or
S Press the "Hold" key. The key flashes. (The "Hold" sensor
key must be configured  page 93.)
Retrieving a held call:
Select and confirm the option shown in the connections
context menu.
or
R Press the illuminated "Hold" key. (The "Hold" sensor key
must be configured  page 93.)
Using line keys
On multi-line telephones you can use the line keys to
place ongoing calls on hold.
R Press the corresponding trunk key. The line key LED
starts flickering. The call is now on hold.
Forwarding station...
Display last
Save & exit
Hold
If you do not retrieve the held call after a defined
time interval, a reminder beep sounds three
times and a prompt to retrieve the call or discon-
nect appears on the display. The settings for this
can be found on  page 105 and  page 106.
Reconnect

Siemens OpenStage 80 SIP Specifications

General

Brand	Siemens
Model	OpenStage 80 SIP
Category	IP Phone
Language	English