Siemens OpenStage 80 SIP User Manual

Call recording
263
Step by Step
Controlling call recording
Starting call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected.
You are conducting a call. Recording has not started.
The recording button LED is not lighting.
[ You are conducting a call (see also  page 259).
S Press the recording button to start the recording - the
LED key lights up.
You hear a beep and the recording symbol
| is shown
on the display. The call is now being recorded (see also
 page 260)
Pausing call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected.
You are conducting a call. Recording has started. The
recording button LED lights up.
[ You are conducting a call (see also  page 259).
R Press the recording button to pause the recording - the
LED extinguishes and the recording symbol
| on the
display disappears.
You can start the recording again at any time, for
example to continue recording the current call.
Ending call recording automatically
Prerequisite: You are conducting a call. Recording has
started. The recording button LED lights up.
] or n The recording is ended automatically as soon as the call
is terminated or if the call status changes so that the call
is no longer being recorded - for example if a line is
placed on manual hold and another line is seized
(Multiline).
The LED extinguishes and the recording symbol
| on
the display disappears.

Siemens OpenStage 80 SIP Specifications

General

Brand	Siemens
Model	OpenStage 80 SIP
Category	IP Phone
Language	English