Siemens OpenStage 80 SIP User Manual

Making calls with multiple lines
127
Step by Step
Making calls with multiple lines
You can use your OpenStage 60/80 as a multi-line
phone. If you have any questions regarding how to con-
figure your OpenStage phone as a multi-line phone,
please contact your administrator.
The following is a description of the telephony scenari-
os for multi-line phones. To facilitate comprehension,
you should familiarize yourself with the enhanced tele-
phony application and how to use the line keys before-
hand. Furthermore, you can specify individual settings
for your multi-line telephone. Refer to the following sec-
tions for a detailed description of the individual compo-
nents:
• Introduction to multi-line phones  page 15
• Lines and line keys  page 26
• Multi-line telephony interface  page 42
• Individual settings  page 151
Incoming calls
Depending on your individual settings, you will be noti-
fied of incoming calls  page 221.
Accepting calls for the primary line
In this case, the telephone behaves in the same way as
a single-line telephone. See  page 55 and
 page 100.
Answering a call via a Bluetooth headset
T Press the flashing key for the main line
or
J Press the answer key on the headset to answer the call.
Accepting calls for secondary lines
Prerequisite: The secondary line is configured on your
multi-line telephone.
Using the handset
^ Lift the handset.

Siemens OpenStage 80 SIP Specifications

General

Brand	Siemens
Model	OpenStage 80 SIP
Category	IP Phone
Language	English