Siemens OpenStage 80 SIP User Manual

Step by Step
Bluetooth
250
Using a Bluetooth Conference Phone
You can connect a Bluetooth conference phone to your
OpenStage 60/80 which is approved for use with the
OpenStage 60/80. Ask your administrator about ap-
proved conference phone types.
Connecting a "Konftel 60W" Bluetooth
conference phone
Below is an example of connecting and operating a
"Konftel 60W" conference phone.
Prerequisite: The Bluetooth function on your Open-
Stage is activated  page 230. The "Konftel 60W" con-
ference phone is ready for use but turned off (see user
guide "Konftel 60W").
v Press the key shown until the application’s "Settings"
tab is active.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown. The Bluetooth
pairing manager dialog is selected.
Select the option shown.
Finding and pairing the Bluetooth conference
phone Konftel 60W
Hold down the trim key on the "Konftel 60W" for two
seconds until the blue display lights flash (Warning: the
device must be switched off first).
Select and confirm the option shown in the context
menu. The system searches for devices.
Select and confirm the Bluetooth device Konftel 60W
found.
j Enter and confirm the PIN ("0000" for Konftel 60W).
User
Configuration
Bluetooth
Paired devices
Options
Add device
Konftel 60W

Siemens OpenStage 80 SIP Specifications

General

Brand	Siemens
Model	OpenStage 80 SIP
Category	IP Phone
Language	English