Communication
2.2 PROFINET communication
SIMOCODE pro - Communication
48 Function Manual, 11/2018, A5E40508495002A/RS-AC/003
Integration of SIMOCODE pro into the automation system (PLC)
I/O configurations
SIMOCODE pro V PN (GP) supports a number of I/O configurations, which define the
structure and length of the I/O data that are cyclically transferred between the IO controller
(PLC) and the IO device (SIMOCODE pro). In the case of SIMOCODE pro, these
configurations are termed
.
Cyclic data to SIMOCODE pro V PN (GP)
The following basic types are available:
● Basic type 1, 4 bytes:
Figure 2-11 Cyclic data to SIMOCODE pro, basic type 1, 4 bytes
● Basic type 2, 2 bytes:
Figure 2-12 Cyclic data to SIMOCODE pro, basic type 2, 2 bytes
To Next Page
Loading...
Need help?
General
