Description
1.7 Nameplates
SIMOTION D4x5
Manual, 02/2012
25
1.7 Nameplates
Side-mounted type plate
The following figure shows you all the information included in the type plate located on the
side of the unit.
0RGXOHGHVLJQDWLRQ
2UGHU1R
6HULDOQXPEHU
&7LFN
F8/XV
+DUGZDUHYHUVLRQ
Figure 1-5 D425 type plate
Note
You might need to access the information provided on the side-mounted type plate after the
D4x5 has been mounted. The type plate is located on the right side of the module housing
and is covered by the SINAMICS S120 module. For this reason, we recommend that you
make a note of the serial number of the Control Unit prior to assembly.
Note
The information contained in each field of the type plate on your actual Control Unit may
differ from that presented in this manual (for example, a later product version, approvals and
marks that have not yet been earned, etc., may be shown).