Parts for SIMOTION D410-2 Article number Accessories Spare part
RJ45 plug connector, IE FC RJ45 Plug 145
• 1 unit package
• 10 unit package
• 50 unit package
6GK1901-1BB30-0AA0
6GK1901-1BB30-0AB0
6GK1901-1BB30-0AE0
X -
FastConnect cables for Industrial Ethernet / PROFINET
IE FC standard cable GP 2x2 6XV1840-2AH10 X -
IE FC exible cable GP 2x2 6XV1870-2B X -
IE FC trailing cable GP 2x2 6XV1870-2D X -
IE FC trailing cable 2x2 6XV1840-3AH10 X -
IE FC marine cable 2x2 6XV1840-4AH10 X -
Stripping tool for Industrial Ethernet / PROFINET Fast Connect cables
IE FC stripping tool 6GK1901-1GA00 X -
Reference
You can nd order data information for other SINAMICS drive components, such as Line
Modules, Motor Modules, DRIVE-CLiQ cables, etc. in Catalog SIMOTION PM 21.
Note
The procedure for replacing the SIMOTION D410‑2 fan is described in the SIMOTION D410‑2
Commissioning and Hardware Installation Manual.
Spares On Web
Spares On Web is an information system that enables you to nd out which spare parts are
available for your device. For information, visit the following Internet address (
https://
www.sow.siemens.com).
In order to view the spare parts, you require the article number and the serial number of the
module.
Both numbers can be found on the rating plate on the module or the packaging label.
7.2 TM31 terminal module
Characteristics
The TM31 Terminal Module allows you to expand the number of available digital I/Os as well as
the number of analog I/Os within a drive system. The TM31 is connected via DRIVE-CLiQ. It has
2 DRIVE-CLiQ interfaces for this.
Spare parts / accessories
7.2 TM31 terminal module
SIMOTION D410-2
100 Equipment Manual, 07/2021, A5E33446720B
To Next Page
Loading...
Need help?
General
