A.2 Device-specic information
Note regarding SIMOTION D
Note
The product standard EN 61800-3 describes the EMC requirements placed on "Variable-speed
drive systems". As such, it denes dierent limits depending on the location of the drive system.
SINAMICS S120 power units are designed for use in the second environment. The term second
environment refers to all locations outside residential areas. These are basically industrial areas
which are supplied from the medium-voltage line supply via their own transformers.
It is essential to follow the installation instructions in the SINAMICS S120 Manuals in order to
ensure compliance with emitted interference and immunity values.
The same installation instructions apply for the SIMOTION D410-2 Control Unit as for the
SINAMICS S120 CU310-2 Control Unit with regard to EMC.
For further information on this topic also refer to the SIMOTION PM 21 Catalog as well as the
SINAMICS Function Manuals.
Standards and approvals
A.2 Device-specic information
SIMOTION D410-2
Equipment Manual, 07/2021, A5E33446720B 109
To Next Page
Loading...
Need help?
General
