Standards and approvals
A
A.1 General rules
CE marking
Our products satisfy the requirements and protection objectives of the EC Directives and comply with the
harmonized European standards (EN).
Electromagnetic compatibility
Standards for EMC are satised if the EMC Installation Guideline is observed.
SIMOTION products are designed for industrial use in accordance with product standard DIN EN
61800‑3, Category C2.
cULus approval
Listed component mark for United States and the Canada Underwriters Laboratories (UL) according to
Standard UL 508, File E164110, File E115352, File E85972.
You can nd further information on the respective device on the Internet at http://
database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm Enter the rst seven
characters of the article number at Keyword. Then click Search.
EMC limits in South Korea
KC registration number: KCC-REM-S49-SIMOTION
For sellers or other users, please keep in mind that this device in an A-grade electromagnetic wave device.
This device is intended to be used in areas other than home.
The EMC limits to be observed for Korea correspond to the limits of the EMC product standard
for variable-speed electric drives EN 61800-3 of category C2 or the limit class A, Group 1
according to EN 55011. By implementing appropriate additional measures, the limit values
according to category C2 or limit value class A, Group 1, are observed. Additional measures, such
as the use of an additional RFI suppression lter (EMC lter), may be necessary.
The measures for EMC-compliant design of the system are described in detail in this manual
respectively in the Installation Guideline EMC.
SIMOTION D410-2
Equipment Manual, 07/2021, A5E33446720B 107
To Next Page
Loading...
Need help?
General
