5.7 Series commissioning
Overview
Series commissioning is the commissioning of several identical converters. During series
commissioning, it is sucient to commission one of the converters and then transfer the
settings of the rst converter to additional converters.
Precondition
The following preconditions apply to the converters regarding series commissioning:
• All converters have the same article number
• The converters to which the settings are transferred have the same or a higher rmware
version as the source converter with the original settings.
Function description
Procedure
1. Commission the rst converter.
2. Back up the settings of the rst converter to an external storage medium.
Uploading the converter settings (Page165)
3. Transfer the settings from the rst converter to another converter via the data storage
medium.
Downloading the converter settings (Page382)
Commissioning
5.7Series commissioning
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK 157
To Next Page
Loading...
Need help?
General