Siemens SINAMICS G120C User Manual

Appendix
A
A.1 New and extended functions
A.1.1 Firmware version 4.7 SP14
Table A-1 New functions and function changes in 󹪝rmware4.7 SP14
 Function SINAMICS
  G120 G120D
 
*'
*&
&83
&8%
&8(
&86
&8'
&8'
1 The G115D converter now supports the extended safety function 'Safety Limited
Speed (SLS)' when using motors from SIEMENS and third-party manufacturers.
✓ - - - ✓ - ✓ -
A.1.2 Firmware version 4.7 SP13
Table A-2 New functions and function changes in 󹪝rmware4.7 SP13
 Function SINAMICS
   G120 G120D
 
*'
*0
*&
&83
&8%
&8(
&86
&8'
&8'
1 SIMOTICS 1FP1 and 1FP3 synchronous-reluctance motors have also been
approved for operation with SINAMICS G120C.
- ✓ ✓ ✓ ✓ ✓ - ✓ -
2 The extended safety functions SS1, SLS, SSM and SDI are approved when
using synchronous-reluctance motors from Siemens and third-party manu‐
facturers.
- - - - - ✓ - ✓ -
3 The converter transmits the state of the fail-safe digital input F-DI 0 via
PROFIsafe when using the basic functions.
You can 󹪝nd more information in the "Safety Integrated" Function Manual.
"Safety Integrated" function manual (https://
support.industry.siemens.com/cs/ww/en/view/109751320)
✓ ✓ ✓ - - ✓ ✓ ✓ ✓
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK 449

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating