Siemens SINAMICS G120C User Manual

Number Name
p8806[0...53] Identi󹪝cation and Maintenance 1 / I&M 1
p8807[0...15] Identi󹪝cation and Maintenance 2 / I&M 2
p8808[0...53] Identi󹪝cation and Maintenance 3 / I&M 3
p8809[0...53] Identi󹪝cation and Maintenance 4 / I&M 4
p9400 Safely remove memory card / Mem_card rem
p9484 BICO interconnections search signal source / BICO S_src srch
Note
Write protection for multimaster 󹪝eldbus systems
Via multimaster 󹪝eldbus systems, e.g. BACnet or Modbus RTU, in spite of write protection being
activated, parameters can still be changed. So that write protection is also active when accessing
via these 󹪝eldbuses, you must additionally set p7762 to 1.
7.2 Know-how protection
Overview
Know-how protection prevents unauthorized reading of the converter settings.
To protect your converter settings against unauthorized copying, in addition to know-how
protection, you can also activate copy protection.
Requirement
Know-how protection requires a password.
Combination of know-how protection and
copy protection
Is a memory card necessary?
Know-how protection without copy protection The converter can be operated with or without mem‐
ory card.
Know-how protection with basic copy protection The converter can only be operated
with a SIEMENS memory card
Recommended memory
cards (Page165)
Know-how protection with extended copy pro‐
tection
Protecting the converter settings
7.2Know-how protection
SINAMICS G120C Converters
176 Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK

Siemens SINAMICS G120C Specifications

General

Brand	Siemens
Model	SINAMICS G120C
Category	Inverter
Language	English