Siemens SINAMICS G120C User Manual

 Function SINAMICS 
  G120 G120D
15 Expansion of the "End stop control" function on the following converters:
• SINAMICS G120
• SINAMICS G120C
• SINAMICS G120D
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ -
16 Expansion of the technology controller to include the following functions:
• Gain K
P
and integral time T
N
can be adapted.
• The system deviation can be used as adaptation signal
- - ✓ - ✓ - - - -
17 Expansion to the torque limiting for SINAMICS G120 converters with
CU230P‑2 Control Unit
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
18 The converter displays the state "PROFIenergy pause" as follows:
• LED RDY "green on": 0.5s
• LED RDY o󹪜: 3s
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Appendix
A.1New and extended functions
SINAMICS G120C Converters
454 Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating