Messages
9.2 Message paths
SIWAREX WT241
82 Manual, 05/2015, A5E36046748A
9.2 Message paths
You can read out the messages using different paths. You define the path for forwarding and
processing of messages during configuration.
The messages are processed for two basic purposes:
● For display on an Operator Panel for the operator
● For linking in the control software to control specific reactions in the process.
The following message paths are possible:
● Output of the message buffer to the SIWATOOL program (takes place automatically)
● Output by means of data records DR 30 and DR 32 in case of communication with a
Modbus master
To Next Page
Loading...
Need help?
General
